168 Adding and Replacing Parts
Hinge Cover
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE: To help prevent damage to the system board, remove the battery from the
battery bay before you begin working inside the computer.

Removing the Hinge Cover

1
Follow the procedures in "Before You Begin" on page161.
2
Open the display as far as it will open.
1 optical drive 2 notch
3 device security screw
2
1
3