2

1

3

1

metal securing tabs (2)

2

WLAN card

3

mylar sleeve

 

 

Replacing a WLAN Card

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card.

NOTICE: To avoid damage to the WLAN card, never place cables under the card.

1Insert the WLAN card connector into the system board connector labeled "WLAN" at a 45-degree angle.

2Press the other end of the WLAN card down into the securing tabs until the card clicks into place.

Adding and Replacing Parts

181

Page 181
Image 181
Dell PP22L owner manual Replacing a Wlan Card, 181