주의: 안전 지침(계속)

랙 장착 시스템

랙의 안정성과 안전을 위해 다음 지침을 준수하십시오. 특정 주의사항과 절차에 관한 내용은 시스템 및 랙과 함께 제공된 랙 설치 설명서를 참조하십시오.

시스템은랙에장착되는구성요소입니다. 그러므로여러주변장치나지원되는하드웨어 뿐만 아니라, 모든 시스템도 "구성요소"입니다.

주의: 랙에 전면 및 측면 고정 다리를 설치하지 않고 시스템을 설치하면, 랙이 넘어져 다칠 위험이 있습니다. 랙에 구성요소를 설치하기 전에 항상 고정 다리를 설치하십시오.

랙에 시스템 구성요소를 설치한 다음에는 절대로 한 번에 여러 개의 구성요소를 잡아 당기지 마십시오. 여러 개로 확장된 구성요소를 함께 잡아 당기면, 무게로 인해 랙이 넘어져 부상을 입을 수도 있습니다.

: 본 시스템은 고객 랙 키트를 사용하는 Dell™ 랙 캐비넷에서 사용할 수 있도록 인증 되었습니다. 타제품의 랙 캐비넷에 시스템과 랙 키트를 설치하는 것은 어떠한 안전 기관의 승인도 받은 바가 없습니다. 사용자의 재량에 따라 안전 기관의 적합 승인을 받은 랙 캐비닛에 시스템과 랙 키트를 사용할 수도 있지만 Dell에서는 이러한 연결에 대해 보증하지 않으며 어떠한 책임도 지지 않습니다.

시스템 랙 키트는 숙련된 서비스 기술자가 랙에 설치해야 합니다. 기타 다른 랙에 키트를 설치하는 경우, 랙이 Dell 랙 사양과 맞는지 확인하십시오.

주의: 혼자서 무거운 랙을 움직이려고 하지 마십시오. 랙의 높이와 무게로 인해 최소한 2명이 함께 작업해야 합니다.

랙 작업을 하기 전에 고정 다리가 랙에 단단히 장착되었는지, 바닥으로 확장 되었는지, 랙의 전체 무게를 바닥이 지탱하는지 확인하십시오. 랙 설치 작업을 하기 전에 단일 랙에 전면과 측면 고정 다리를 설치하거나 결합된 다중 랙에 알맞은 전면 고정 다리를 설치하십시오.

항상 바닥부터 랙을 적재하고 가장 무거운 물품부터 먼저 적재하십시오.

랙의구성요소를확장하기전에랙이균형을이루고안정되어있는지확인하십시오.

구성요소 레일 분리 래치를 누르거나 구성요소를 랙에서 당기거나 랙으로 미는 경우에는 슬라이드 레일에 손이 낄 수 있으므로 조심하십시오.

구성요소를 랙으로 넣은 다음에는 조심스럽게 레일을 잠금 위치로 놓은 다음, 구성요소를 랙으로 미십시오.

Dell PowerConnect RPS-600 설치 안내서

187

Page 188
Image 188
Dell RPS-600, 2T227 setup guide 장착 시스템

2T227, RPS-600 specifications

The Dell RPS-600, model 2T227, is a robust and efficient power supply solution designed specifically for Dell's PowerEdge servers. This unit is particularly favored in configurations where high availability and redundancy are critical components of the system architecture. The RPS-600 is known for its reliability and performance, making it an ideal choice for businesses that require consistent uptime.

One of the standout features of the RPS-600 is its impressive power output capacity of 600 watts, which provides ample energy supply for even the most demanding server configurations. This power supply unit operates efficiently, ensuring that the servers run optimally while consuming minimal energy. The high efficiency is supported by a design that meets the 80 PLUS certification, indicating that it operates at least 80% efficiency at various loads, thus minimizing wasted energy and reducing operational costs.

The RPS-600 is designed to work with Dell's redundant power supplies, allowing for seamless failover in case of any power supply failure. This feature is essential for enterprises that cannot afford any system downtime. The unit is equipped with a hot-swappable design, allowing IT administrators to replace the power unit without having to shut down the server, ensuring continuous operation during maintenance or upgrades.

In terms of connectivity, the RPS-600 features a standard input connector that ensures compatibility with a wide range of Dell servers. The power supply is also designed with built-in protections that safeguard against common electrical issues such as overvoltage, overcurrent, and short circuits. This enhances both the reliability and the longevity of the connected hardware.

Furthermore, the Dell RPS-600 supports a wide input voltage range, making it flexible for use in various environments and geographic locations. Its compact form factor allows it to fit seamlessly into server racks, maximizing space utilization while ensuring optimal airflow and cooling.

Overall, the Dell RPS-600,2T227, embodies advanced features and technologies that cater to the demands of modern data centers and businesses. With its focus on efficiency, reliability, and ease of maintenance, it remains a top choice for organizations looking to enhance their server's performance while ensuring maximum uptime and minimal operational costs.