Polish Center for Testing and Certification Notice

The equipment should draw power from a socket with an attached protection circuit (a 3-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.

The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible.

A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-EN 55022: 1996.

Dell PowerConnect RPS-600 Setup Guide

23

Page 23 Page 25
Page 24
Image 24
Dell RPS-600, 2T227 setup guide Polish Center for Testing and Certification Notice
Page 23 Page 25

2T227, RPS-600 specifications

The Dell RPS-600, model 2T227, is a robust and efficient power supply solution designed specifically for Dell's PowerEdge servers. This unit is particularly favored in configurations where high availability and redundancy are critical components of the system architecture. The RPS-600 is known for its reliability and performance, making it an ideal choice for businesses that require consistent uptime.

One of the standout features of the RPS-600 is its impressive power output capacity of 600 watts, which provides ample energy supply for even the most demanding server configurations. This power supply unit operates efficiently, ensuring that the servers run optimally while consuming minimal energy. The high efficiency is supported by a design that meets the 80 PLUS certification, indicating that it operates at least 80% efficiency at various loads, thus minimizing wasted energy and reducing operational costs.

The RPS-600 is designed to work with Dell's redundant power supplies, allowing for seamless failover in case of any power supply failure. This feature is essential for enterprises that cannot afford any system downtime. The unit is equipped with a hot-swappable design, allowing IT administrators to replace the power unit without having to shut down the server, ensuring continuous operation during maintenance or upgrades.

In terms of connectivity, the RPS-600 features a standard input connector that ensures compatibility with a wide range of Dell servers. The power supply is also designed with built-in protections that safeguard against common electrical issues such as overvoltage, overcurrent, and short circuits. This enhances both the reliability and the longevity of the connected hardware.

Furthermore, the Dell RPS-600 supports a wide input voltage range, making it flexible for use in various environments and geographic locations. Its compact form factor allows it to fit seamlessly into server racks, maximizing space utilization while ensuring optimal airflow and cooling.

Overall, the Dell RPS-600,2T227, embodies advanced features and technologies that cater to the demands of modern data centers and businesses. With its focus on efficiency, reliability, and ease of maintenance, it remains a top choice for organizations looking to enhance their server's performance while ensuring maximum uptime and minimal operational costs.
Top Page Image Contents