技術援助

參數	12 V 輸出

電壓	+12.0 VDC
起始精確度	+/–1%
最小電流	2 A
最大電流	13 A
線路調整率	+/–1%
負載調整率	+/–10%
雜波和脈動	10%，峰間值
過高電壓容許度	5%
過低電壓容許度	5%

環境規格

作業溫度	攝氏 0 至 40 度 (華氏 32 至 104 度)
作業相對濕度	8% 至 90%
存放溫度	攝氏 40 度至 80 度 (華氏 40 度至 176 度)
存放相對濕度	5% 至 95% 非冷凝
震動	10 至 300 Hz，在一小時內以 1.0 G 的固定加
	速度對每個正交座標軸 X、Y、Z 進行掃描

Dell 隨時可為您提供您所需的技術援助。請參閱 PowerConnect 交換器隨附的 PowerConnect CD，以獲得關於與 Dell 公司聯絡的資訊。

Dell PowerConnect RPS-600 安裝指南

2T227, RPS-600 specifications

The Dell RPS-600, model 2T227, is a robust and efficient power supply solution designed specifically for Dell's PowerEdge servers. This unit is particularly favored in configurations where high availability and redundancy are critical components of the system architecture. The RPS-600 is known for its reliability and performance, making it an ideal choice for businesses that require consistent uptime.

One of the standout features of the RPS-600 is its impressive power output capacity of 600 watts, which provides ample energy supply for even the most demanding server configurations. This power supply unit operates efficiently, ensuring that the servers run optimally while consuming minimal energy. The high efficiency is supported by a design that meets the 80 PLUS certification, indicating that it operates at least 80% efficiency at various loads, thus minimizing wasted energy and reducing operational costs.

The RPS-600 is designed to work with Dell's redundant power supplies, allowing for seamless failover in case of any power supply failure. This feature is essential for enterprises that cannot afford any system downtime. The unit is equipped with a hot-swappable design, allowing IT administrators to replace the power unit without having to shut down the server, ensuring continuous operation during maintenance or upgrades.

In terms of connectivity, the RPS-600 features a standard input connector that ensures compatibility with a wide range of Dell servers. The power supply is also designed with built-in protections that safeguard against common electrical issues such as overvoltage, overcurrent, and short circuits. This enhances both the reliability and the longevity of the connected hardware.

Furthermore, the Dell RPS-600 supports a wide input voltage range, making it flexible for use in various environments and geographic locations. Its compact form factor allows it to fit seamlessly into server racks, maximizing space utilization while ensuring optimal airflow and cooling.

Overall, the Dell RPS-600,2T227, embodies advanced features and technologies that cater to the demands of modern data centers and businesses. With its focus on efficiency, reliability, and ease of maintenance, it remains a top choice for organizations looking to enhance their server's performance while ensuring maximum uptime and minimal operational costs.

Dell RPS-600, 2T227 setup guide 技術援助

Models: 2T227 RPS-600

技術援助

2T227, RPS-600 specifications