使用您的系統時

防止靜電損害

注意事項:只有合格的技術人員才能維修您的系統。您的保固不包括由於未經 Dell 授權 的維修而導致的損壞。

靜電會損壞系統內部的精密元件。為防止靜電損壞,請在觸摸任何電子元件 (例如微 處理器) 之前,先導去您身上的靜電。您可以經常觸摸底架上未上漆的金屬表面,以 導去您身上的靜電。

您亦可採取下列步驟以防止靜電釋放 (ESD) 造成的損壞:

打開對靜電敏感之元件的運送紙箱後,在您已準備好將它安裝在系統中之前,請 勿將元件從防靜電的包裝材料中取出。在打開防靜電的包裝之前,請務必導去您 身上的靜電。

運送敏感元件時,首先應將它放入防靜電的容器或包裝內。

請在無靜電的工作區域處理所有的敏感元件。如有可能,請使用防靜電地板墊、 工作檯墊和防靜電的接地金屬箍。

註:您的系統也可能包括帶電池的電路板或元件。這些電池也必須在電池收集地點進行處理。 若要獲得有關這些電池的資訊,請參閱特定電路板或元件的說明文件。

Dell PowerConnect RPS-600 安裝指南

71

Page 72
Image 72
Dell RPS-600, 2T227 setup guide 使用您的系統時, 防止靜電損害

2T227, RPS-600 specifications

The Dell RPS-600, model 2T227, is a robust and efficient power supply solution designed specifically for Dell's PowerEdge servers. This unit is particularly favored in configurations where high availability and redundancy are critical components of the system architecture. The RPS-600 is known for its reliability and performance, making it an ideal choice for businesses that require consistent uptime.

One of the standout features of the RPS-600 is its impressive power output capacity of 600 watts, which provides ample energy supply for even the most demanding server configurations. This power supply unit operates efficiently, ensuring that the servers run optimally while consuming minimal energy. The high efficiency is supported by a design that meets the 80 PLUS certification, indicating that it operates at least 80% efficiency at various loads, thus minimizing wasted energy and reducing operational costs.

The RPS-600 is designed to work with Dell's redundant power supplies, allowing for seamless failover in case of any power supply failure. This feature is essential for enterprises that cannot afford any system downtime. The unit is equipped with a hot-swappable design, allowing IT administrators to replace the power unit without having to shut down the server, ensuring continuous operation during maintenance or upgrades.

In terms of connectivity, the RPS-600 features a standard input connector that ensures compatibility with a wide range of Dell servers. The power supply is also designed with built-in protections that safeguard against common electrical issues such as overvoltage, overcurrent, and short circuits. This enhances both the reliability and the longevity of the connected hardware.

Furthermore, the Dell RPS-600 supports a wide input voltage range, making it flexible for use in various environments and geographic locations. Its compact form factor allows it to fit seamlessly into server racks, maximizing space utilization while ensuring optimal airflow and cooling.

Overall, the Dell RPS-600,2T227, embodies advanced features and technologies that cater to the demands of modern data centers and businesses. With its focus on efficiency, reliability, and ease of maintenance, it remains a top choice for organizations looking to enhance their server's performance while ensuring maximum uptime and minimal operational costs.