Figure 3-10. Installing and Removing the Processor
2
1
3
|
|
|
|
| 4 |
|
|
|
|
| 5 |
|
| 6 |
|
|
|
1 | processor shield | 2 | socket cover (remove before | 3 | |
|
|
| adding second processor) |
|
|
4 | processor | 5 | ZIF socket | 6 | socket key (2) |
11Open the processor shield and then lift the processor out of the socket. Leave the release lever up so that the socket is ready for the new processor.
NOTICE: Be careful not to bend any of the pins on the LGA socket when removing the processor. Bending the pins can permanently damage the socket and system board.
Installing a Processor
1Unpack the new processor.
2Align the processor with the socket keys on the ZIF socket. See Figure
3If you are adding a second processor to an empty socket, perform the following steps: a Remove the protective cover from the processor socket. See Figure
b Pull the
52