Expansion-Card Riser
Removing an Expansion-Card Riser
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.
1Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
2Open the system. See "Opening and Closing the System" on page 38.
3If applicable, remove the expansion card from the riser.
4Press the release latch on the riser board and lift the riser board straight up from the system board. See Figure
Figure 3-13. Expansion-Card Riser Removal
2
1
4 |
3
1 | riser board | 2 | riser board release latch | 3 | riser board connector on |
|
|
|
|
| system board |
4 riser board alignment pins (2)
58
