Dell SC1435 owner manual Integrated Devices Screen

Enabling AMD™ PowerNow!™ Technology

PowerNow! technology controls your system’s processor performance automatically, dynamically adjusting the operating frequency and voltage according to the task at hand. When an application does not require full performance, significant amounts of power can be saved. Performance is designed to still be responsive, with maximum processor performance being delivered when required, and automatic power savings when possible. (PowerNow! support is dependent on the operating system and version used on your system.)

To enable the PowerNow! feature, run the System Setup Program and enable the Demand-Based Power Management option on the CPU Information screen.

Additionally, for Microsoft® Windows® operating systems, you will need to install the PowerNow! driver to enable this feature. The driver is available on the Dell OpenManage Service and Diagnostic CD provided with your system and at support.dell.com.

Integrated Devices Screen

Table 2-5 lists the options and descriptions for the information fields that appear on the Integrated Devices screen.

Table 2-5. Integrated Devices Screen Options

Option	Description
Embedded SATA	Allows the integrated SATA controller to be set to Off or ATA mode.
Controller (Off default)
IDE CD-ROM Controller	Enables the integrated IDE controller. When set to Auto, each channel of the
(Auto default)	integrated IDE controller is enabled if IDE devices are attached to the channel and
	an external IDE controller is not detected.
	NOTE: This CD-ROM option will not appear on this menu screen if your system does
	not include this optional device.
User-Accessible USB Ports	Enables or disables the system's user-accessible ports. Options are All Ports On or
(All Ports On default)	All Ports Off. Disabling the USB ports makes system resources available for other
	devices.
Embedded Gb NIC1	Enables or disables the system's integrated NIC1. Options are Enabled without
(Enabled with PXE	PXE, Enabled with PXE, and Disabled. PXE support allows the system to boot
default)	from the network. Changes take effect after the system reboots.
MAC Address	Displays the MAC address for NIC1. This field does not have user-selectable
	settings.
Embedded Gb NIC2	Enables or disables the system's integrated NIC2. Options are Enabled without
(Enabled without PXE	PXE, Enabled with PXE, and Disabled. PXE support allows the system to boot
default)	from the network. Changes take effect after the system reboots.
MAC Address	Displays the MAC address for NIC2. This field does not have user-selectable
	settings.

28

Using the System Setup Program