Dell SC1435 Cooling Fan Modules, Replacing the Cooling Shroud, Removing a Cooling Fan Module

Figure 3-4. Cooling Shroud

1

2

1 cooling shroud 2 locator pins (6)

Replacing the Cooling Shroud

1To install the cooling shroud, align the edges of the shroud with the six locator pins on the system board. See Figure 3-4.

2Lower the shroud into place over the system board.

3Close the system. See "Opening and Closing the System" on page 38.

Cooling Fan Modules

This system contains two cooling fan modules, each comprised of two dual-rotor fans.

Removing a Cooling Fan Module

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.

1Turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals.

2Open the system. See "Opening and Closing the System" on page 38.

3Remove the cooling shroud. See "Removing the Cooling Shroud" on page 39.

40

Installing System Components