Driver Installation

The Dell™ Serial-Attached SCSI (SAS) 6/iR controller requires software drivers to operate with Microsoft® Windows®, Red Hat® Linux®, and SUSE® Linux operating systems.

This chapter contains the procedures for installing the drivers for the following operating systems:

Microsoft Windows Server® 2003 Server family.

Microsoft Windows XP.

Red Hat Linux Versions 4 and 5.

SUSE Linux Enterprise Server Version 10.

Windows Vista™.

The four methods for installing a driver that are discussed in this chapter are:

During operating system installation.

After adding a new SAS 6/iR controller on an existing operating system.

Updating existing drivers.

Installing from a Dell Precision™ Workstation Operating System CD or DVD. This media includes the drivers.

NOTE: Operating system installation on an Integrated Mirroring or Integrated Striping virtual disk is supported only when the virtual disk is in an optimal state.

NOTE: Device drivers are frequently updated. To ensure you have the latest version of any driver mentioned in this section, check the Dell Support website at support.dell.com. If a newer version exists, you can download the driver to your system.

Creating a Driver Diskette

NOTE: Driver diskette is not needed if you are installing from a Dell Precision™ Workstation Operating System CD or DVD.

1Browse to the download section of the system on the Dell Support website at support.dell.com.

2Locate and download the latest SAS 6/iR driver for the system. The drivers are packaged on the Dell Support website such that they can be written onto a diskette.

3Follow the instructions on the support site for extracting the driver to the diskette.

Driver Installation

19

Page 19
Image 19
Dell SCSI 6/IR manual Driver Installation, Creating a Driver Diskette