Dell T8144 manual Connecting Two Monitors, XD-Picture Card, Ii Cf I/Ii, MicroDrive Card

xD-Picture Card

and SmartMedia (SMC)

CompactFlash Type I

and II (CF I/II) and

MicroDrive Card

Memory Stick (MS/MS Pro)

SecureDigital Card (SD)/

MultiMediaCard (MMC)

To use the Media Card Reader:

1Check the media or card to determine the proper orientation for insertion.

2Slide the media or card into the appropriate slot until it is completely seated in the connector.

If you encounter resistance, do not force the media or card. Check the card orientation and try again.

Connecting Two Monitors

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: If you are connecting two monitors that have VGA connectors, you must have the optional DVI adapter. If you are connecting two flat-panel monitors, at least one of them must have a VGA connector. If you are connecting a TV, you may connect only one monitor (VGA or DVI) in addition to the TV.

If you purchased a graphics card that supports dual monitors, follow these instructions to connect and enable your monitors. The instructions tell you how to connect either two monitors (each with a VGA connector), one monitor with a VGA connector and one monitor with a DVI connector, or a TV.

Setting Up and Using Your Computer

19