6Replace the computer cover (see page 98).
NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.
7Connect your computer and devices to electrical outlets, and turn them on.
8Enter system setup (see page 103) and restore the settings you recorded in step 1.
9Properly dispose of the old battery. See the Product Information Guide for battery disposal information.
Replacing the Computer Cover
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide.
1Ensure that all cables are connected, and fold cables out of the way.
2Ensure that no tools or extra parts are left inside the computer.
3Align the bottom of the cover with the tabs located along the bottom edge of the computer.
4Using the tabs as leverage, rotate the cover downward and press down to close it.
computer cover
back of computer
bottom hinges
5Ensure that the cover is seated correctly before moving it to the upright position.
NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.
6Connect your computer and devices to electrical outlets, and turn them on.
98
