Removing and Installing Parts 59
Removing the Computer Cover CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
ProductInformation Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.
1
Follow the procedures in "Before You Begin" on page 53.
NOTICE: Ensure that sufficient space exists to support the removed cover—at least 30 cm (1 ft) of desk top space.
NOTICE: Ensure that you are working on a level, protected surface to avoid scratching either the computer or the
surface on which it is resting.
2
Lay your computer on its side with the computer cover facing up.
3
Pull back the cover latch release located on the top panel.
4
Locate the three hinge tabs on the bottom edge of the computer.
5
Grip the sides of the computer cover and pivot the cover up, using the bottom hinges as leverage points.
6
Release the cover from the hinge tabs and set it aside in a secure location.
computer cover
cover latch release
back of computer
bottom hinges