Denon AV Surround Receiver, AVR-1612 NOTE, Press AMP, Information, version Basic, version Advanced, Set up the subwoofer, Set up the microphone, nn Set up the operation mode

1 Set up the microphone

Mount the setup microphone on a tripod or stand and place it in the main listening position.

When placing the setup microphone, adjust the height of the sound receptor to the level of the listener’s ear.

Sound receptor

Setup microphone

If you do not have a tripod or stand, set up the microphone on, for example, a seat without a back.

NOTE

•Do not hold the setup microphone in your hand during measurements.

•Avoid placing the setup microphone close to a seat back or wall as sound reflections may give inaccurate results.

2 Set up the subwoofer

If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below.

nn When using a subwoofer with a direct mode

Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting.

nn When using a subwoofer without a direct mode

Make the following settings:

•Volume : “12 o’clock position”

•Crossover frequency : “Maximum/Highest Frequency”

•Low pass filter : “Off”

•Standby mode : “Off”

Set up speakers (Audyssey® Auto Setup)

3 Set up the remote control unit

nn Set up the operation modePress AMP to set the remote control unit to AMP- operation mode.Press AMP

vSee overleaf

version Basic

version Advanced

Information

12