Connections

Important information

•Make connections as follows before using this unit. Select an appropriate connection type according to the devices to be connected.

•You may need to make some settings on this unit depending on the connection method. Refer to each description for more information.

•Select the cables (sold separately) according to the devices being connected.

NOTE

•Do not plug in the power cord until all connections have been completed. (When the Setup wizard is running, follow the instructions in the Setup wizard screen for making connections.)

•When running the Setup wizard, turn off the power supply of connected devices.

•When making connections, also refer to the operating instructions of the other devices being connected.

•Be sure to connect the left and right channels properly (left with left, right with right).

•Do not bundle power cords together with connection cables. Doing so can result in noise.

Examples of screen display

 

• Menu screen

 

• Status display screen

 

 

 

 

 

When the input source is

 

 

 

 

 

switched.

 

Menu

 

 

 

 

 

 

Surr.Parameter

 

 

 

 

Audio Adjust

 

 

 

 

Information

Tone

 

 

 

 

Setup Wizard

AudysseySettings

 

 

 

 

System Setup

Manual EQ

 

 

 

 

Input Setup

RESTORER

 

 

 

 

 

Audio Delay

 

 

 

 

 

 

 

[HDMI]

 

 

 

 

 

SOURCE:BD

 

 

 

 

 

MODE :STEREO

 

 

 

 

 

 

When the volume is adjusted.

Master Volume

-55.5dB

 

 

version Basic

version Advanced

Relationship between video signals and monitor output

GFlow of video signalsH

Video device

This unit

 

Monitor (TV)

 

 

 

 

Input

Output

 

Output

(IN)

(MONITOR OUT)

Input

HDMI connector

HDMI connector

HDMI

HDMI connector

 

 

connector

 

S-Video connector

S-Video

 

 

 

connector

 

 

Status display: The operating status appears briefly on the screen when the input source is switched or the volume is changed.

NOTE

•If you operate the menu while playing back 3D video content or computer’s resolution (e.g. VGA), the playback video is replaced by the menu screen. The playback video is not displayed behind the menu screen.

•This unit does not show the status display while playing back 3D video content or computer’s resolution (e.g. VGA).

•The menu screen and status display are displayed when this unit and a TV are connected by HDMI. Furthermore, the menu screen and status display are not displayed when this unit and a TV are connected by VIDEO.

Information

Video connector

Video connector

Video connector

Video connector

•Resolutions of HDMI-compatible TVs can be checked at “HDMI Monitor Information” (vpage 57).

•HDMI signals cannot be converted into analog signals (vpage 88).

•Analog signals cannot be converted into HDMI signals (vpage 88).

4