System Setup

Setting items

Setting details

 

 

 

 

GUI

Screensaver : Make screensaver settings.

 

 

Make the settings related to • ON : The screensaver is activated during menu

displays on the TV screen.

display, USB, iPod or Tuner screen display if no

 

operation is performed for an approximately

 

5-minute continuous period. When you press

 

uio p, the screensaver is cancelled and

 

the screen before that screen saver started is

 

displayed.

 

• OFF : Screensaver is not activated.

Format : Set the video signal format to be output for the TV you are using.

•NTSC : Select NTSC output.

•PAL : Select PAL output.

“Format” can also be set by the following procedure. However, the menu screen is not displayed.

1.Press and hold the main unit’s 2 and 9 for at least 3 seconds. “V.Format:<NTSC>” appears on the display.

2.Press the main unit’s TUNER PRESET CH +, – and set the video signal format.

3.Press the main unit’s iPod 1 to complete the setting.

NOTE

When a format other than the video format of the connected TV is set, the picture will not be displayed properly.

Text : Display the details of operation when switching surround mode, input mode, etc.

•ON : Turn display on.

•OFF : Turn display off.

Master Volume : Display the master volume during adjustment.

•Bottom : Display at the bottom.

•Top : Display at the top.

•OFF : Turn display off.

When the master volume display is hard to see when superimposed on movie subtitles, set to “Top”.

USB : Set the USB screen display time when the input source is “USB/ iPod”.

•Always : Show display continuously.

•30s : Show display for 30 seconds after operation.

•10s : Show display for 10 seconds after operation.

•OFF : Turn display off.

BD

64

Setting items

Setting details

 

 

GUI

iPod : Set the iPod screen display time when the input source is “DOCK”

(Continued)

or “USB/iPod”.

 

• Always : Show display continuously.

 

• 30s : Show display for 30 seconds after operation.

 

• 10s : Show display for 10 seconds after operation.

 

• OFF : Turn display off.

 

Tuner : Set the tuner screen display time when the input source is

 

“Tuner”.

 

• Always : Show display continuously.

 

• 30s : Show display for 30 seconds after operation.

 

• 10s : Show display for 10 seconds after operation.

 

• OFF : Turn display off.

Remote Setup Guide

See “Registering preset codes” (vpage 72).

Search a preset code to

 

register in the remote

 

control unit.

 

Quick Sel.Name

• Up to 16 characters can be input.

Change the “Quick Select”

• For character input, see page 49.

display title to one you

 

prefer.

 

Dimmer

Bright : Normal display brightness.

Adjust the display

Dim : Reduced display brightness.

brightness of this unit.

Dark : Very low display brightness.

 

OFF : Turns the display off.

Buttons on the main unit can be used for operations.

Each time DIMMER is pressed, the setting is changed as shown below.

 

 

 

 

Bright

 

 

Dim

 

 

 

 

 

 

OFF

 

 

 

Dark

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setup Lock

ON : Turn protection on.

 

 

 

 

 

 

Protect settings from

OFF : Turn protection off.

 

 

 

 

 

 

inadvertent change.

When canceling the setting, set “Setup Lock” to “OFF”.

 

NOTE

When “Setup Lock” is set to “ON”, the settings listed below can no longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt to operate related settings.

• Menu operations

• Channel Level

 

 

vSee overleaf

version Basic

version Advanced

Information