Denon AV Surround Receiver, AVR-1612 manual 72

			Input Setup
Setting items	Setting details	Input Mode (Audio)	Default settings are underlined.

Default

The “Input Assign” settings are returned to the default settings.

Yes : Reset to the defaults.

No : Do not reset to the defaults.

If you select “Default” and press ENTER, the message “Return settings to the default?”

is displayed. Select “Yes” or “No”, and then press ENTER.

The input modes available for selection may vary depending on the input source.

Setting items	Setting details
Input Mode	Auto : Automatically detect input signal and perform playback.
Set the audio input modes	HDMI : Play only signals from HDMI input.
for the different input	Digital : Play only signals from digital input.
sources.	Analog : Play only signals from analog input.
It is normally recommended

Video	Default settings are underlined.
Set the source video.
Setting items	Setting details
Video Select	SOURCE : Play the picture and sound of the input source.
Video of another input	DVD / SAT/CBL / V.AUX / DOCK : Select video input source to view. This
source is played back	can be set for individual input sources.
combined with the playing

audio.	NOTE
	• It is not possible to select HDMI input signals.
	• Input sources for which “Delete” is selected at “Source Delete”
	(vpage 63) cannot be selected.

to set the audio input mode	• “HDMI” can be set for input sources for which “HDMI” is assigned at
to “Auto”.
	“Input Assign” (vpage 68).
	• “Digital” can be set for input sources for which “Digital” is assigned at
	“Input Assign” (vpage 68).
	• If the input source is set to “TV” or “GAME”, it cannot be set to
	“Analog”.
	• When digital signals	are properly input, the	indicator lights on
	the display. If the	indicator does not light, check the digital input
	connector assignment and the connections.
	• If “HDMI Control” is set to “ON” and a TV compatible with the ARC is
	connected via the HDMI MONITOR connectors, the input mode whose
	input source is “TV” is fixed to ARC.
	: Detect type of digital input signal and decode and play automatically.

Video Mode

Make settings for video processing.

DVD SAT/CBL

V.AUX DOCK

Auto : Process video automatically based on the HDMI content information.

Game : Always process video appropriate for game content.

Movie : Process video normally.

If “Video Mode” is set to “Auto”, the mode is switched according to the input contents.

Decode Mode			Auto
Set the audio decode mode PCM : Decode and play only PCM input signals.
for input source.			DTS : Decode and play only DTS input signals.
BD	DVD	TV	• This item can be set for input sources for which “HDMI” or “Digital” is
SAT/CBL		GAME
			assigned at “Input Assign” (vpage 68).
V.AUX	DOCK
			• Normally set this mode to “Auto”. Set “PCM” and “DTS” when

inputting the corresponding input signal.

version Basic

version Advanced

Information

BD

69