Denon AV Surround Receiver, AVR-1612 manual 58

Setting items					Setting details
Dynamic EQ®	ON : Use Dynamic EQ®.
Solve the problem of	OFF : Do not use Dynamic EQ®.
deteriorating sound quality
as volume is decreased			or		is displayed when set to “ON”.
by taking into account
human perception and
room acoustics. Works with
MultEQ®.
Reference Offset	0dB (Film Ref) : This is the default setting and should be used when
Audyssey Dynamic EQ® is	listening to movies.
referenced to the standard	5dB : Select this setting for content that has a very wide dynamic range,
film mix level. It makes	such as classical music.
adjustments to maintain	10dB : Select this setting for jazz or other music that has a wider dynamic
the reference response	range. This setting should also be selected for TV content as that is usually
and surround envelopment	mixed at 10 dB below film reference.
when the volume is turned	15dB : Select this setting for pop/rock music or other program material
down from 0 dB. However,	that is mixed at very high listening levels and has a compressed dynamic
film reference level is not	range.
always used in music or		Setting is enabled when “Dynamic EQ®” is “ON” (vpage 55).
other non-film content.
Dynamic EQ® Reference
Level Offset provides three
offsets from the film level
reference (5 dB, 10 dB, and
15 dB) that can be selected
when the mix level of the
content is not within the
standard.
Dynamic Volume®	Midnight : Most adjustment to softest and loudest sounds.
Solve the problem of large	Evening : Medium adjustment to loudest and softest sound.
variations in volume level	Day : Least adjustment to loudest and softest sounds.
between TV, movies and	OFF : Do not use “Dynamic Volume®”.
other content (between
quiet passages and	•			is displayed when set to “Midnight”, “Evening” or “Day”.
loud passages, etc.) by

automatically adjusting to	• If “Dynamic Volume®” is set to “Yes” in Auto Setup (vpage 15),
	the setting is automatically changed to “Evening”.
the user’s preferred volume
setting.

BD

	Audio Adjust
Manual EQ	Default settings are underlined.

Use the graphic equalizer to adjust the tone of each speaker.

“Manual EQ” can be set when “MultEQ®” setting (vpage 54) is “Manual”.

Setting items	Setting details
Adjust Channel	q Select the speaker tone adjustment method.
Correct the tone of each	All : Adjust the tone of all speakers together.
speaker.	L/R : Adjust the tone of left and right speakers together.
	Each : Adjust the tone of each speaker.
	w Select the speaker.
	e Select the adjustment frequency band.
	63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
	• Select the speakers you want to adjust when “L/R” or “Each” is
	selected.
	r Adjust the level.
	–20.0dB – +6.0dB (0.0dB)

Curve Copy	Yes : Copy.
Copy “Audyssey Flat” curve	No : Do not copy.
from MultEQ®.

•“Curve Copy” is displayed after Audyssey® Auto Setup has been performed.

•When you select “Curve Copy” and press ENTER, the “Set EQ curve to

Audyssey Flat?” prompt is displayed. Select either “Yes” or “No”, and press ENTER.

DefaultYes : Reset to the defaults.

The “Manual EQ” settings No : Do not reset to the defaults.
are returned to the default	When you select “Default” and press ENTER,
settings.
	the “Return settings to the default?” prompt
	is displayed. Select either “Yes” or “No”, and
	press ENTER.

55

version Basic

version Advanced

Information