GiPod / USB memory deviceH

 

GRemote Control UnitH

 

 

 

 

Symptom

Cause/Solution

Page

 

Symptom

Cause/Solution

Page

 

Basic

When a USB

• The set cannot recognize a USB memory device. Check the

9

 

The set cannot be

 

• Batteries are worn out. Replace with new batteries.

82

 

memory device is

connection.

 

 

operated with the

 

• Operate the remote control unit within a distance of about

82

 

connected, “USB” is

• A USB memory device not conforming to mass storage class or

–

 

remote control unit.

 

23 ft/7 m from this unit and at an angle of within 30°.

 

 

version

menu.

conforming to mass storage class or MTP standards.

 

 

 

 

unit.

82

 

not displayed on the

MTP standards is connected. Connect a USB memory device

 

 

 

 

• Remove any obstacle between this unit and the remote control

 

 

 

• A USB memory device that the set cannot recognize is connected.

–

 

 

 

• Insert the batteries in the proper direction, checking the q and

82

 

 

 

This is not a malfunction. DENON does not guarantee that all USB

 

 

 

 

w marks.

 

 

 

 

memory devices will operate or receive power.

 

 

 

 

• The set’s remote control sensor is exposed to strong light (direct

82

 

 

 

 

 

 

 

 

 

 

• USB memory device is connected via USB hub. Connect the USB

–

 

 

 

sunlight, inverter type fluorescent bulb light, etc.). Move the set

 

 

 

 

 

 

 

 

 

 

 

memory device directly to the USB port.

 

 

 

 

to a place in which the remote control sensor will not be exposed

 

 

Advanced

Files on a USB

• USB memory device is in format other than FAT16 or FAT32.

–

 

 

 

to strong light.

 

 

 

memory device

Set the format to FAT16 or FAT32. For details, refer to the USB

 

 

 

 

• The operation mode does not match the settings of the device to

71

 

 

cannot be played.

memory device’s operating instructions.

 

 

 

 

operate. Check the operation mode.

 

 

 

 

• USB memory device is divided into multiple partitions. When

–

 

 

 

 

 

 

version

 

divided into multiple partitions, only files stored in the top partition

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

can be played.

 

 

 

 

 

 

 

 

 

• Files are stored in a non-compatible format. Record the files in a

27

 

 

 

 

 

 

 

 

compatible format.

 

 

 

 

 

 

 

 

 

• You are attempting to play a file that is copyright protected. Files

27

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

that are copyright protected cannot be played on this unit.

 

 

 

 

 

 

 

 

The file names

• Characters that cannot be displayed are used. This is not a

–

 

 

 

 

 

 

Information

are not displayed

malfunction. On this unit, characters that cannot be displayed are

 

 

 

 

 

 

 

properly (“...”, etc.).

replaced with a “.” (period).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

iPod cannot be

• Some iPods do not support being used connected directly to the

9

 

 

 

 

 

 

 

played.

USB port.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

93