Pressing ui, select the first letter of the device

5 brand name. Then press ENTER.

RemoteSetupGuide

 

Please select the

[1/4]

first letter of the

1

brand name

A

of the device.

B

 

C

DVD

D

[CH+/-]Page+/-

E

 

• The first character is displayed as 1, A to Z. (Initials for the brand are displayed for each category.)

For brand names that start with numbers and symbols, select “1”.

• When there are several pages of brand names, the pages can be switched by pressing the remote control unit’s CH + or

CH –.

 

Pressing ui, select the device

6 brand name. Then press ENTER.

 

RemoteSetupGuide

 

 

Please select the

Dantax

 

brand name.

 

 

Denon

 

 

Disney

 

 

DSE

 

DVD

Durabrand

 

 

 

•When there are several pages of brand names, the pages can be switched by pressing the remote control unit’s CH + or CH –.

NOTE

If the desired brand name is not listed, the supplied remote control unit cannot control the device. Use the remote control unit supplied with the device to be used.

7 The procedures for registering remote control codes and remote control preset registration are displayed.

 

RemoteSetupGuide

Device

DVD

Brand

Denon

Code

30490[1/3]

1.Press[INPUT SOURCE]. 2.Press and hold [DEVICE ON(I)]

for 3 seconds. 3.Input Code with [0-9].

4.Press any key to check device.

[QUICK1] OK

[QUICK2] NG

[QUICK3] Return

NOTE

If a wrong brand name is selected, press QUICK SELECT 3. The following screen is displayed:

RemoteSetupGuide

Press [AMP] button. And press [ENTER] button to return Brand select menu.

O K

Press AMP then ENTER to return to step 6.

8 Press the input source button on which the preset code is to be registered (BD, SAT/CBL, TV, DVD, V.AUX, DOCK or GAME).

•For TV, only the preset code for the categories “TV”, “TV/DVD”, or “TV/VCR” can be registered.

9 Press and hold DEVICE Zfor at least 3 seconds. The indicator flashes twice.

73

Registering preset codes

Enter a five-digit code using 0 – 9.

10Press the buttons with an interval less than 10 seconds.

 

RemoteSetupGuide

 

 

 

Device

DVD

 

 

 

Brand

Denon

 

 

 

Code

30490[1/3]

 

 

 

1.Press[INPUT SOURCE].

 

 

 

2.Press and hold [DEVICE ON(I)]

 

 

for 3 seconds.

 

 

 

3.Input Code with [0-9].

 

 

 

4.Press any key to check device.

 

 

[QUICK1] OK

[QUICK2] NG

[QUICK3] Return

 

 

 

 

 

 

•When the code is registered.

The indicator flashes twice.

•When the code is not registered correctly

Theindicator slowly flashes once. Perform from step 8 again.

•When an input number is not correct

Press ON once then perform the operations from step 8 again.

11Operate the device being used to check the operation.

•If the device is operating, press QUICK SELECT 1. Go to step 12.

•If the device is not operating, press QUICK SELECT 2. Go to step 13.

12The screen shown below is displayed, and registration of the preset code is completed.

RemoteSetupGuide

Remote Setup Guide is finished.

Press [AMP] button. And press [ENTER] button to return MENU.

OK

•The menu screen is retrieved. Press AMP then ENTER.

vSee overleaf

version Basic

version Advanced

Information