Denon AV Surround Receiver, AVR-1612 nn For 2-channelsources, nn For multi-channelsources

Audio Adjust

Setting items	Setting details
Height Gain	Low : Reduce the front height channel volume.
Control the front	height Middle : Front height channel sound is output with standard sound
channel volume.	volume.
	High : Increase the front height channel volume.

	NOTE
	“Height Gain” is displayed for the following settings.
	• When the “Speaker Config.” – “F.Height” setting (vpage 60) is set
	other than to “None”.
	• When surround mode is “PLgz” or the PLgz decoder is used.
PLgz Height	ON : Audio is output from the front height speaker.
Determine whether to use	OFF : Audio is not output from the front height speaker.
front height channel.	NOTE
	• “PLgz Height” is displayed with the settings listed below.
	• When the “Speaker Config.” – “F.Height” setting (vpage 60) is
	set to other than “None”.
	• “PLgz Height” cannot be set if the HD Audio source being played
	includes a front height channel. In this case, the Front height channel
	is played back without decoding in PLgz mode, using the input signal.
AFDM	ON : Set.
(Auto flag detect mode)	OFF : Do not set.
Detect the source’s

surround back channel	[Example] Playing Dolby Digital software (with EX flag)
	• When “AFDM” is set to “ON”, the surround mode is automatically set
signal and set the
	to the DOLBY D + PLgx C mode.
optimum surround mode
	• To play in the DOLBY DIGITAL EX mode, set “AFDM” to “OFF” and
automatically.
	“Surr.Parameter” – “S.Back” to “MTRX ON”.
	Some Dolby Digital EX sources do not include EX flags. If the playback
	mode does not switch automatically even when “AFDM” is set to
	“ON”, set “Surr.Parameter” – “S.Back” to “MTRX ON” or “PLgx C”.

Setting items	Setting details
S.Back	nn For 2-channel sources
Sets the method of	ON : The surround back channel is used.
generating of the surround	OFF : No signal is played from the surround back channels.
back channel.	nn For multi-channel sources
	Set the decoding method for the surround back channel.
	ONz1 : Convert the 5.1-channel source of the DTS/DTS-HD input
	signals to the 7.1-channel output recommended by DTS and then play.
	MTRX ON : Generate and play the surround back channel signals from
	the surround channel signals by means of the Dolby Digital EX decoder.
	ES MTRXz2 : Generate and play the surround back channel signals
	from the surround channel signals of the DTS source by means of the
	DTS-ES decoder.
	PLgx Cz3 : Generate and play the surround back signals by decoding
	the signals in the Dolby Pro Logic gx Cinema mode.
	PLgx M : Generate and play the surround back signals by decoding the
	signals in the Dolby Pro Logic gx Music mode.
	OFF : Do not play the surround back channel.
	z1 This can be selected when playing the 5.1-channel source of DTS/
	DTS-HD.
	z2 This can be selected when playing DTS sources.
	z3 This can be selected when “Speaker Config.” – “S.Back”
	(vpage 59) is set to “2spkrs”.
	If the source being played contains a surround back signal, the decoder
	type is automatically selected by the AFDM function. Set “AFDM” to
	“OFF” to switch to your preferred decoder.
	NOTE
	If the setting in “Speaker Config.” – “S.Back” (vpage 59) is “None”,
	“S.Back” is not displayed.
Subwoofer	ON : The subwoofer is used.
Turn subwoofer output on	OFF : The subwoofer is not used.
and off.	NOTE

version Basic

version Advanced

Information

	This can be set when the surround mode is “DIRECT” (vpage 32) and
	the “Subwoofer Mode” (vpage 60) is “LFE+Main”.
Default	Yes : Reset to the defaults.
The “Surr.Parameter”	No : Do not reset to the defaults.

settings are returned to the	When you select “Default” and press ENTER,
default settings.
	the “Return settings to the default?” prompt
	is displayed. Select either “Yes” or “No”, and
	press ENTER.

vSee overleaf

BD 53