Speaker Setup

Default settings are underlined.

Perform when setting the speakers manually or when changing settings made in Audyssey® Auto Setup.

•If you change the speaker settings after performing Audyssey® Auto Setup, it will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (vpage 98).

•“SYSTEM SETUP” can be used without changing the settings. Please set if necessary.

 

SYSTEM SETUP

 

 

Setting items

Setting details

 

 

Speaker Config.

Front : Set the front speaker size.

Select speaker configuration

• Large : Use a large speaker that can adequately play back low

and size (bass reproduction

frequencies.

capability).

• Small : Use a small speaker that has inadequate playback capacity for

NOTE

low frequencies.

 

version Basic

Setting items

Setting details

 

 

Amp Assign

NORMAL : Select the “NORMAL” setting to perform 7.2-channel playback

The signal output from the

using the surround back or front height speakers.

SURR.BACK/AMP ASSIGN

ZONE2 : Select the “ZONE2” setting to assign the unit’s built-in power

speaker terminal of this unit

amplifier for ZONE2 and output the audio in stereo.

can be switched to match

Bi-AMP : Select the “Bi-AMP” setting to connect the front speakers via

your speaker environment.

the bi-amp connection.

 

2CH : When you perform 2-channel playback in the DIRECT or STEREO

 

mode, select the “2CH” setting to use the other front speakers for

 

playback.

 

Front B : Select the “Front B” setting to use the second set of front

 

speakers for playback. You can switch the front speakers A and B to be

 

used for playback in accordance with the 2-channel playback or multi-

 

channel playback mode. When you select this Front B setting, also

 

perform the “Front Speaker Setup” (vpage 105) procedure.

 

F.Height : Select the “F.Height” setting to use the front height speaker

 

for playback.

Do not use the outward shape of the speaker to determine selection of a “Large” or “Small” speaker. Instead, use the frequencies set in “Crossover Freq.” (vpage 105) as the standard for determining bass reproduction capability.

•When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.

•When “Front” is set to “Small”, “Center”, “Surround“, “Surr.Back” and “Front Height” can not be set to “Large”.

Center : Set the presence and size of the center speaker.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when a center speaker is not connected.

“Large” is not displayed when “Front” is set to “Small”.

Subwoofer : Set the presence of a subwoofer.

•Yes : Use a subwoofer.

•No : Select when a subwoofer is not connected.

When “Front” is set to “Small”, “Subwoofer” is automatically set to “Yes”.

Surround : Set the presence and size of the surround speakers.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when the surround speakers are not connected.

•When “Surround” is set to “Large”, “Surr.Back” and “Front Height” can be set to “Large”.

•When “Surround” is set to “None”, “Surr.Back” and “Front Height” are automatically set to “None”.

version Advanced

Information

vSee overleaf

BD

102