STEP 3

Measurement (2nd – 8th)

•In STEP 3, you will perform measurements at multiple positions (two to eight positions) other than the main listening position.

•Just one position can be measured but measuring multiple positions increases the accuracy of the correction of acoustic distortion within the listening area.

9 Move the setup microphone to position 2, use ui to select “Measure”, and then press

ENTER.

The measurement of the second position starts. Measurements can be made in up to eight positions.

AUDYSSEY AUTO SETUP

STEP3 Measurement (2nd)

1 2 3 4 5 6

Please place the microphone at ear

 

height at 2nd Iistening position.

 

Measure

 

Next Calculation

 

Enter

RETURN Cancel

Start measurement. Output large test tone during measuring

If you want to omit measurements from the next position onward, select “NextCalculation”.

(Go to STEP4 Calculation )

10Repeat step 9, measuring positions 3 to 8.

When measurement of position 8 is completed, a “Measurements finished.” message is displayed.

AUDYSSEY AUTO SETUP

STEP3 Measurement (Finish)

1 2 3 4 5 6

Measurements finished.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Retry

Next Calculation

Enter RETURN Cancel

Proceed to next (Calculation)

Set up speakers (Audyssey® Auto Setup)

STEP 4

Calculation

11On the STEP 3 screen, use ui to select “Next →

Calculation”, and then press ENTER.

Measuring results are analyzed, and the frequency response of each speaker in the listening room is determined.

AUDYSSEY AUTO SETUP

STEP4 Calculation

1 2 3 4 5 6

Now calculating...Please wait. 20%

•Analysis takes several minutes to complete. The time required for this analysis depends on the number of speakers connected.

The more connected speakers there are, the longer it takes to perform analysis.

vSee overleaf

version Basic

version Advanced

Information

22