REC OUT mode

When using the audio/video recording connectors (DVR outputs), you can record the audio or video from a different program source while listening to the currently played track.

1 Press ZONE2 / REC SELECT until “RECOUT SOURCE” is displayed.

Theindicator illuminates.

ZONE2 SOURCE ZONE2 TUNER ···· ZONE2 NET/USB

RECOUT NET/USB RECOUT DOCK ···· RECOUT SOURCE

2 Press ZONE2 / REC SELECT to choose the input source to be recorded.

For operating instructions, refer to the respective device’s operating instructions.

3 Start recording.

For operating instructions, refer to the respective device’s operating instructions.

BD

Convenient functions

To cancel, press ZONE2 / REC SELECT until “ZONE2 SOURCE” is displayed.

Make a test recording before starting the actual recording.

The digital signal input into the HDMI, COAXIAL, and OPTICAL connectors is not output from the analog REC OUT connector.

Sources selected with the REC OUT mode are output from ZONE2 as well.

The operable buttons on the remote control unit in REC OUT mode while it is in the operating mode for ZONE2 are as follows:

ZONE/DEVICE power button

Muting button

Master volume control button

NOTE

Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder.

Input sources for which “Delete” is selected at “Source Delete” (vpage 113) cannot be selected.

72

version Basic

version Advanced

Information