Option Setup

Default settings are underlined.

 

 

 

Make various other settings.

 

 

 

Setting items

Setting details

 

 

Volume Control

Volume Display : Set how volume is displayed.

Set the MAIN ZONE (room

• Relative : Display ---dB (Min), in the range –80.5 dB to 18 dB.

where the unit is located)

• Absolute : Display in the range 0 (Min) to 99.

volume setting.

 

 

 

• The “Volume Display” setting is applied also to the “Volume Limit” and

 

 

“Power On Level” display method.

 

 

• The “Volume Display” setting applies to all zones.

 

 

Volume Limit : Make a setting for maximum volume.

 

 

• OFF : Do not set a maximum volume.

 

 

• –20dB (61) / –10dB (71) / 0dB (81)

 

 

Power On Level : Define the volume setting that is active when the

 

 

power is turned on.

 

 

• Last : Use the memorized setting from the last session.

 

 

• – – – (0) : Always use the muting on condition when power is turned on.

 

 

• –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.

 

 

Mute Level : Set the amount of attenuation when muting is on.

 

 

• Full : The sound is muted entirely.

 

 

• –40dB : The sound is attenuated by 40 dB down.

 

 

• –20dB : The sound is attenuated by 20 dB down.

Source Delete

BD / DVD / TV / SAT/CBL / DVR / GAME1 / GAME2 / V.AUX / DOCK /

Remove from the display

NET/USB / TUNER / CD : Select input source that is not used.

input sources that are not

• ON : Use this source.

used.

• Delete : Do not use this source.

NOTE

• Input sources being used in the various zones cannot be deleted.

• Input sources set to “Delete” cannot be selected using the input source select button.

SYSTEM SETUP

Setting items

Setting details

 

 

 

 

GUI

Screensaver : Make screensaver settings.

 

 

Make the settings related to • ON : The screensaver is activated during

displays on the TV screen.

menu display, NET/USB, iPod or Tuner screen

 

display if no operation is performed for an

approximately 5-minute continuous period. When you press uio p, the screensaver is cancelled and the screen before that screen saver started is displayed.

• OFF : Screensaver is not activated.

Wall Paper : Set wallpaper to display in the background when playback is stopped, etc.

•Picture : Set the background to a picture (DENON logo).

•Black : Set the background to black.

•Gray : Set the background to gray.

•Blue : Set the background to blue.

Format : Set the video signal format to be output for the TV you are using.

•NTSC : Select NTSC output.

•PAL : Select PAL output.

“Format” can also be set by the following procedure. However, the menu screen is not displayed.

1.Press and hold the main unit’s PRESET 1 and PRESET 3 for at least 3 seconds.

“zVideo Format” appears on the display.

2.Press the main unit’s TUNER PRESET CH +, – and set the video signal format.

3.Press the main unit’s INTERNET RADIO V to complete the setting.

NOTE

When a format other than the video format of the connected TV is set, the picture will not be displayed properly.

Text : Display the details of operation when switching surround mode, input mode, etc.

•ON : Turn display on.

•OFF : Turn display off.

vSee overleaf

version Basic

version Advanced

Information

BD

113