DistanceUnit : Set the unit of distance. Set distance from listening • Feet / Meters
position to speakers. Step : Set the minimum variable width of the distance.
Measure beforehand the • 1ft / 0.1ft distance from the listening • 0.1m / 0.01m
position to each speaker. Default : The “Distance” settings are returned to the default settings.
• Yes : Reset to the defaults.
• No : Do not reset to the defaults.
When you select “Default” and press ENTER, the “Return all settings to the default?”
prompt is displayed. Select either “Yes” or “No”, and press ENTER.
Front L / Front R / Center / Subwoofer / Surround L / Surround R /
Surr.Back Lz / Surr.Back Rz / F.Height L / F.Height R : Select the speaker.
zz When the “Speaker Config.” – “Surr.Back” setting (vpage 103) is set to “1spkr”, “Surr.Back” is displayed.
• 0.0ft – 60.0ft / 0.00m – 18.00m : Set the distance.
• The speakers that can be selected differ depending on the “Amp Assign” (vpage 102) and “Speaker Config.” (vpage 102) settings.
• Default settings :
Front L / Front R / Center / Subwoofer / F.Height L / F.Height R : 12.0 ft (3.60 m)
Surround L / Surround R / Surr.Back L / Surr.Back R : 10.0 ft (3.00 m)
• Set the difference in the distance between the speakers to less than 20.0 ft (6.00 m).
NOTE
Speakers set to “None” in “Speaker Config.” (vpage 102) are not displayed.
BD
Setting details
Setting items

 

 

 

 

SYSTEM SETUP

 

 

 

 

 

 

 

 

Setting items

Setting details

 

 

 

 

 

 

 

 

Channel Level

Test Tone Start : Output test tone.

 

 

 

Set the volume of the test

• Front L / F.Height L / Center / F.Height R / Front R / Surround R /

 

 

 

tone to be the same when it

Surr.Back Rz / Surr.Back Lz / Surround L / Subwoofer : Select the

 

 

 

is output from each speaker.

speaker.

 

 

 

 

zz When the “Speaker Config.” – “Surr.Back” setting (vpage 103) is

 

 

 

 

set to “1spkr”, “Surr.Back” is displayed.

 

 

 

 

 

 

 

 

• –12.0dB – +12.0dB (0.0dB) : Adjust the volume.

 

 

 

 

When “Channel Level” is adjusted, the adjusted values are set for all the

 

 

 

 

surround modes. To adjust the channel level separately for the different

 

 

 

 

surround modes, use the operation see page 70.

 

 

 

 

NOTE

 

 

 

 

• Speakers set to “None” in the “Speaker Config.” (vpage 102)

 

 

 

 

settings are not displayed.

 

 

 

 

• When a headphones jack is inserted in the PHONES jack of this unit, the

 

 

 

 

“Channel Level” is not displayed.

Default : The “Channel Level” settings are returned to the default settings.

•Yes : Reset to the defaults.

•No : Do not reset to the defaults.

When you select “Default” and press ENTER, the “Return all settings to the default?”

prompt is displayed. Select either “Yes” or “No”, and press ENTER.

vSee overleaf

version Basic

version Advanced

Information

104