Set up speakers (Audyssey® Auto Setup)

Parameter Check

This function enables you to check the measurement results and equalizer characteristics after Audyssey® Auto Setup.

1 Use uito select “Parameter Check” and then press ENTER.

SPEAKER SETUP

Auto Setup

Audyssey Auto Setup

Amp Assign

Parameter Check

Speaker Config.

 

Bass Setting

 

Distance

 

Channel Level

 

Check auto setup measurement results

2 Use uito select the item you want to check, then press ENTER or p. Measurement results for each speaker are displayed.

Speaker Config. Check Check the speaker configuration.

Distance Check

Check the distance.

Channel Level Check Check the channel level.

Crossover Freq. Check Check the crossover frequency.

EQ Check

Check the equalizer.

•If “EQ Check” is selected, press ui to select equalizing curve (“Audyssey” or “Audyssey Flat”) to be checked.

Use ui to switch the display between the different speakers.

3 Press RETURN B.

The confirmation screen reappears. Repeat step 2.

Retrieving Audyssey® Auto Setup settings
Making the network settings (Network Setup)

This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and still image (JPEG) files stored on a computer.

1 Connect the Ethernet cable (vpage 17 “Connecting to a home network (LAN)”).

2 Turn on this unit (C page 5 “Getting Started”).

This unit performs automatic network setup due to the DHCP function.

When connecting to a network that has no DHCP function, perform the setting in “Network Connecting” (vpage 108).

version Basic

version Advanced

Information

If you set “Restore” to “Yes”, you can return to Audyssey® Auto Setup measurement result (value calculated at the start by MultEQ® XT) even when you have changed each setting manually.

25