Front A/B connection

You can connect a second set of speakers to this unit and use them for playback.

In this case, set “Amp Assign” to “Front B” in steps 3 and 4 for “Set up “Amp Assign”” (vpage 65).

SW

FL(B) FL(A)

FR(A) FR(B)

For surround playback of a multichannel source, if you connect the center speaker, surround speakers and subwoofers, 5.1-channel playback is available.

Front speakers can be used separately, depending on the speaker’s specifications or playback source such as front speakers (A) for multichannel playback and front speakers (B) for 2-channel playback (vpage 105 “Front Speaker Setup”).

NOTE

For speaker cable connections, see C page 6 “Connecting the speakers”.

For speaker impedance , see page 59.

Connect

2.1-channel connection Basicversion

version Advanced

FL SW FR

Information

NOTE

For speaker cable connections, see C page 6 “Connecting the speakers”.

For speaker impedance , see page 59.

nnFor connecting two subwoofers

Two subwoofers can be connected to this unit.

The same signal is output from each subwoofer terminal.

62