Playback in ZONE2 (Separate room)
•You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room where the unit is located).
•You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2.
The source selected for ZONE2 is also output from the recording output connectors.
version Basic
There are two methods to do this, as described below. Choose one of the methods.
qZone playback by speaker output
wZone playback by audio output (PRE OUT) Use an external amplifier.
q Zone playback by speaker outputThe ZONE2 audio signals are output from this unit’s SURR.BACK/AMP ASSIGN speaker terminals using the amplifier assignment function.
nnConnecting and setting the speakers
| “Amp Assign” setting (vpage 102) | Connecting the speakers | ||
| and audio signals output | |||
|
|
| ||
|
|
| ZONE2 | |
ZONE2 | ZONE2 | Output signal : |
|
|
Stereo (L / R) | (L) | (R) | ||
|
|
| ||
|
|
| w q w | q |
The audio signals of this unit’s ZONE2 audio output terminals are output to the ZONE2 amplifiers and played on these amplifiers.
ZONE2 | MAIN ZONE |
| This unit |
| L |
AUX IN | R |
|
We recommend using high quality
NOTE
•It is not possible to play the digital audio signals input from the HDMI, COAXIAL or OPTICAL connectors in ZONE2.
Use analog connections for ZONE2 playback.
•When certain digital signals are being input, noise may be output from the ZONE2 audio output connectors.
version Advanced
Information
BD | 79 |