Q8 Q7Q6Q5Q4 Q3 Q2Q1 Q0 o i u y
version Basic
|
| q |
|
|
|
| w | ||
qInput signal indicators |
|
|
| |
wInput signal channel indicators |
|
|
| |
These light when digital signals are input. |
|
|
| |
When playing HD Audio sources, the |
| indicator lights when a | ||
signal from an extension channel (a channel other than the front,
center, surround, surround back or LFE channel) is input. |
| ||
If there are two or more extension channels, the |
|
| and |
indicators light. |
| ||
eInformation display
The input source name, surround mode, setting values and other information are displayed here.
rOutput signal channel indicators
Lights when audio signals are being output from the speakers.
tFront speaker indicator
This lights according to the setting of the front A and B speakers.
yMonitor output indicators
This indicator lights up when an HDMI monitor is connected. uMaster volume indicator
iMUTE indicator
This lights when the mute mode is selected (vpage 27).
e
oPARTY indicators
These light during party mode (vpage 74 “Party mode function”).
•ORGANIZER
This lights to indicate that party mode has started as Organizer.
•ATTENDEE
This lights to indicate that party mode has started as Attendee.
Q0Audyssey® indicators
Lights up as follows, depending on the setting of “MultEQ® XT”, (vpage 98), “Dynamic EQ®” (vpage 98) and “Dynamic Volume®” (vpage 98).
When “MultEQ® XT”, “Dynamic EQ®” and
“Dynamic Volume®” are “ON”.
When “MultEQ® XT” and “Dynamic EQ®” are
“ON” and “Dynamic Volume®” is “OFF”.
When “MultEQ® XT” is “ON” and “Dynamic EQ®” and “Dynamic Volume®” are “OFF”.
Q1Sleep timer indicator
This lights when the sleep mode is selected (vpage 69, 81).
Q2RESTORER indicator
This lights when the RESTORER mode is selected (vpage 99).
r t
This lights up when ZONE2 (separate room) power is turned on (vpage 80).
Q4Input mode indicators
Set the audio input modes for the different input sources (vpage 91).
Q5HDMI indicator
This lights when playing using HDMI connections.
Q6Tuner reception mode indicators
These light according to the reception conditions when the input source is set to “TUNER”.
STEREO : In the FM mode, this lights up when receiving stereo broadcasts.
TUNED : Lights up when the broadcast is properly tuned in.
AUTO : Lights up when in the auto tuning mode.
Q7Recording output source indicator
This lights when the REC OUT mode is selected.
Q8Decoder indicators
These light when the respective decoders are operating.
version Advanced
Information
126