Desa L32, L36 L36, L42, L32, L36, L36, L42 Continued, On/Off Series Model Ghrcb, Manual Mode

Models: LEN) (V)L32(HP LHN) (V)L36(EN LHP) (V)L36(EP L32, L36 L36, L42, L32, L36, L36, L42 L32, L36, L32, L36, VL36, L42, L36, L42 LZPR) LEP) (V)L36(ZNR

1 44
Download 44 pages 7.35 Kb
Page 26
Image 26
ON/OFF SERIES (MODEL GHRCB)

OPERATING FIREPLACE

Continued

ON/OFF SERIES (MODEL GHRCB)

Hold the control button on the hand-held remote until burner turns on. Hold the control button again until burner turns off (see Figure 41).

To Lock press both buttons on hand-held remote control until light stops flashing. Hand- held remote control is now locked. If the fire is on it will be turned off automatically. In the locked state, the light will not light up when any button is pressed.

To Unlock press both buttons together on hand- held remote control until the light stops flashing. The hand-held remote is now unlocked.

Figure 41 - On/Off Hand-Held Remote Control Button

Turns Burners On

and Off

Figure 41 - On/Off Hand-Held Remote

Control Unit (GHRCB)

THERMOSTAT SERIES (MODEL GHRCTB)

The hand-held remote can be operated using either the manual mode (MANU) or thermo- static mode (AUTO) (see Figure 42). To select Fahrenheit/Centigrade mode display, carefully press the ˚C/˚F mode button with the end of a paper clip or similar blunt object.

 

 

Turns

Digital

 

Hand-Held

 

Remote On

Display

 

 

or Off and

Shows

 

 

Allows You

Temperature

to Choose

and Settings

the Manual

 

 

Turns

 

Setting

 

 

Burners On

Selects

or Off

 

 

Auto Setting

 

 

Decreases

Increases

Room

 

 

Room

Temperature

Temperature

in AUTO

 

 

in AUTO

Mode

Locks System to

Mode

 

Prevent Accidental

Ignition

Figure 42 - Thermostat Hand-Held Remote Control Unit (GHRCTB)

Manual Mode

1.Press the POWER and LOCK buttons togeth- er to turn on the hand-held remote control.

2.Press the MANU button to turn on the fireplace.

3.Press the POWER and LOCK buttons together to turn off the fireplace.

Auto (Thermostatic) Mode

1.Press the POWER and LOCK buttons togeth- er to turn on the hand-held remote control.

2.Press AUTO button to select this mode.

3.Set the desired room temperature by press- ing the TEMP + or - buttons.

4.Press the POWER and LOCK buttons together to turn off the fireplace

Note: Do not leave the hand-held remote in the AUTO mode close to the fireplace. The radiant heat from the fireplace will turn off the fireplace. Ideally, place the hand-held remote in the center of the room facing towards the fireplace.

Note: Do not hold the hand-held remote for a long time. Body temperature will affect its operation in the AUTO mode.

Safety Features

When away from home for an extended period of time or as a child safety feature to prevent accidental ignition of the fireplace, the receiver ON/OFF/REMOTE switch should be in the OFF position.

Auto Shutoff Feature

1.If the average room temperature exceeds 82 degrees Fahrenheit (28 degrees Centi- grade), the hand-held remote control will perform a safety override and shut the fireplace off. This feature is not available in the MANU mode.

2.The receiver continuously receives signals from the hand-held remote to control the room temperature. If the hand-held remote is misplaced, obstructed or for any reason cannot transmit to the receiver, the receiver will shut off the fireplace after 8 minutes.

Key Pad Lock Feature

This feature allows the user to lock/unlock the keypad on the hand-held remote in the MANU or AUTO mode to prevent inadvertent operation (i.e. children operating the hand-held remote control, etc.). The keypad is locked in either on or off. Press the POWER and LOCK buttons together to turn the unit on or off.

26

www.desatech.com

115254-01A

Page 26
Image 26
Desa L32, L36 L36, L42, L32, L36, L36, L42, LZPR) Continued, On/Off Series Model Ghrcb, Thermostat Series Model Ghrctb