1.

Strap Hole

Attach the hand-strap here.

 

 

 

2.

Navigation key

The 4-way Navigation key for menu selections.

 

 

 

3.

„/2

Press to stop or go-back from action.

 

 

 

4.



Press to stop and display menu, or go to the previous menu.

 

 

 

5.

LCD Display

Show menus and selection playing.

 

 

 

6.

Hold Handle

The hold handle of the PMP3520.

 

 

 

7.

Power LED

This LED is illuminated when the PMP3520 is powered

 

 

on, and flashes when charging the battery.

 

 

 

8.

Record LED

This LED is illuminated when recording.

 

 

 

9.

Power On/Off

Press to power On/Off.

 

 

 

10.

Lock Switch

When this Switch is locked, all key press commands are

 

 

disabled. Including power On/Off switch.

 

 

 

11.

MIC

Built-in microphone for voice recording.

 

 

 

12.

Volume Control

Push it to the right to increase volume, to the left to

 

 

decrease volume. Press it down to mute.

 

 

 

13.

REC[]

Press to start or stop recording.

 

 

 

14.

SD/MMC slot

Insert SD/MMC card to retrieve data.

 

 

 

15.

Speaker

Built-in speaker.

 

 

 

16.

AV Line-In Jack

Plug AV cable here to enable AV Line-In recording.

 

 

 

17.

Earphone Jack

Plug the earphones here.

 

 

 

18.

AV Line-Out Jack

Plug the AV cable here to connect the PMP3520 to an

 

 

external display (TV).

 

 

 

19.

USB Connector

Connect the mini USB connector of the supplied USB

 

 

cable here, and the other end to PC host/OTG equipment.

 

 

 

20.

DC-In Jack

Plug in the supplied AC Adapter here to recharge the

 

 

battery.

 

 

 

21.

Battery cap

Press the latch and push the cap forward to replace the

 

 

rechargeable battery.

 

 

 

22.

Tripod Screw Hole

Secure a tripod here to hold the PMP3520.

 

 

 

23.

IR Receiver

Implements commands from remote control.

 

 

 

10

© 2005 Directed Electronics—all rights reserved

Page 10
Image 10
Directed Electronics PMP3520 manual „/2