DIRECTV SYSTEM FROM HUGHES NETWORK SYSTEMS - OWNER’S MANUAL

Banner. Either of these banners will go away after a few seconds, or you can press the key or key to clear it on demand.

The OneLine™ Guide

If you’d like to know what’s on another channel without switching from your current channel, use the OneLine Guide. Simply press or and begin browsing. You can

see the channel call sign and number, titles, and program start and

end times. When you see something you like; then press to tune to the channel.

You may also directly enter a channel number to advance the OneLine Guide to that channel. The other filter keys, including , , and , as well as the key will also control the content of the OneLine Guide.

Pressing the key will cancel the OneLine Guide.

The OneLine Guide

TurboTune™

The TurboTune feature provides access to nine of your preferred channels on top of the current video.

The TurboTune panel is displayed by pressing the key while watching video as long as there are no messages prompting you to

press for some other purpose. The TurboTune panel displays nine channel tags. These channels can be specified via the TurboTune button on the SETUP MENU. The header area of the panel displays the title of the program currently airing on the highlighted channel tag. You can choose one of the nine by moving

the highlight over the desired channel and pressing . A shortcut to moving the highlight is to press the remote control numbers that corresponds with the on-screen position of the desired channel. In the example on the right, press 7 for HBO.

The TurboTune panel

AlphaTune™

AlphaTune enables you to tune to a channel by spelling a channel’s call sign rather than by number. To

enter the AlphaTune mode, you must first press the key located on the lower right on the

keypad. The symbol appears on the screen. You can now enter the numbers and letters (located above each of the number keys) to spell the desired channel call sign. For example, to tune to

ESPN, press . All special symbols (i.e., &, /, +, !, etc.) are located on the key. As soon as the receiver can determine which channel you are seeking, it will tune to it automatically. No additional keys need to be entered. If the channel call sign is fewer than four letters, you may need to

press to indicate that you are finished. If more than one channel shares the same set of key (i.e.,

“CNN” and “COM”, both using), the next matching occurrence is used. If that was not the

channel you wanted, just press to find the next occurrence of that key sequence. It is important that you enter the channel call sign exactly. With experience, you will become more familiar with the channel name abbreviations that are used.

PAGE 5-2

Page 40
Image 40
DirecTV HIRD-D01, HIRD-D11 owner manual OneLine Guide, TurboTune, AlphaTune