QUESTIONS A P P E N D I X ANSWERSAND A
Questions? Did we forget to tell you something? Many people, over time, have questions about their DIRECTV System. We have compiled the most common of these questions and the answers in this appendix. We hope they help!
QI had a signal but now I am getting a message “Searching for satellite signal. To access related
utilities, press 
.” What happened?
ARain clouds and snow can affect the satellite signal reception. This loss of signal is temporary. Also check for new growth on trees and bushes that could be blocking the signal. One other possibility is that the wind or someone has moved the satellite dish antenna.
QWhy can’t I control my TV?
ABefore you can control your TV, VCR, or any other device, besides your digital satellite receiver, you must program your remote control to match your different devices. See the chapter, “Programming Your Remote Control” in this manual for specific instructions. If you have already successfully programmed your remote control, try pressing the appropriate device key to put your remote in the proper mode. Then try controlling that device. Also, make sure that the batteries in the remote control are good.
QMy digital satellite receiver does not respond when I press keys. What’s wrong?
AMost likely, if the front panel keys work but the remote control doesn’t work, try pressing the “SAT” key before trying to control the digital satellite receiver. If that doesn’t work, press the “SAT” and “Mute” keys together and try again. If that doesn’t work, or if the front panel keys don’t work either, unplug your digital satellite receiver for 30 seconds, then plug it back in.
Since your digital satellite receiver is a computing device it is susceptible to erratic changes in power and/or signal, just as any other computer, and these sudden changes can cause it to become “confused.”
QSome channels look good, while others freeze or indicate that no signal is available. What’s wrong?
AThe most common causes for this behavior relate to the cable between your digital satellite receiver and the satellite dish antenna. Confirm that
QHow can I watch one satellite program while recording another?
AWith only one digital satellite receiver, unfortunately, you can’t. Each receiver can only decode one channel at a time.
