DirecTV HIRD-D11 Unlocking Procedure, Temporarily Overriding the Lock, The UNLOCK pop-uppanel

THE DIGITAL SATELLITE RECEIVER’S MENU SYSTEM

menu screen to remind you that the digital satellite receiver is locked.

REMEMBER YOUR CODE! You will need this code whenever you wish to override the lock or to unlock the digital satellite receiver.

Unlocking Procedure

To remove the lock and its restrictions, highlight the Unlock button and press the key.

When the SYSTEM UNLOCK pop-up panel appears, you can use the and keys or the remote control number keys to enter the four-digit passcode that you used to lock the digital satellite receiver earlier. If you enter the code using the number keys, you will not see the numbers appear on the screen.

After entering the passcode, highlight and select OK. Once the digital satellite receiver has been unlocked, all limits and restrictions are removed! Otherwise, choose Cancel to keep the lock in effect.

If you forget your four-digit code, call your service provider for assistance.

The UNLOCK pop-up panel

Temporarily Overriding the Lock

The LOCK OVERRIDE pop-up panel on video The LOCK OVERRIDE pop-up panel on menus

There are times you may wish to temporarily remove the restrictions imposed by locking. You can do

this without unlocking the digital satellite receiver. When you press , when prompted, the LOCK OVERRIDE pop-up will be displayed. It looks and navigates just like the SYSTEM UNLOCK pop-up.

Note: Once the correct four-digit code is entered, the digital satellite receiver will remain unlocked until you power the digital satellite receiver off. At that time all locks and limits will be enforced again.

PAGE 7-7