Adjust the network settings to fit your configuration needs. If you need additional information use the Help button on the top right hand corner of the configuration screen.
3.Click Apply to save any changes you make.
4.Click Reboot for changes to take effect.
Procedure for Using a Name Server
To configure a DNS server, follow these steps:
1.Click Network and select Use the following IP address.
2.Enter the IP address for the DNS server in the Name Server box. The DNS server maps names (MyDeviceName.mycompany.com) to IP addresses (192.105.1.2).
3.Enter a name for a group of network devices.
4.Enter the domain name that this device will live in and is tied to the DNS server address assigned in step 2. This name can be used by other network devices to talk to it, instead of using the its IP address. Get this name from the network administrator, because it must be entered in the DNS server to work properly.
5.Enter the Base Socket. The base socket is the incoming port number which remote devices need to use to access the device using the named protocols.
Note: | Base Socket |
| This determines which network port (socket) on this Digi terminal server |
| another network device (such as another Digi terminal server or a PC) uses to |
| communicate using certain services. Most applications can leave this value |
| unchanged. To calculate these settings: |
| Telnet port = Base Socket + Serial Port Number |
| Raw port = Base Socket + 100 + Serial Port Number |
|
|
18 | Chapter 3 Configuration |
