Digi 90000583_A manual Mib, Configuration Procedure Web Interface

•Read-write for MIB II (RFC 1213), which is an Internet-standard MIB, consisting of managed objects from the systems, interfaces, IP, ICMP, TCP, UDP, transmission, and SNMP group

•Read-write for the character-stream devices using SMIv2 MIB (RFC 1658)

•Read-write for the RS-232-like hardware devices MIB (RFC 1659)

•Read-write for the device server IP Network Control Protocol of the Point-to-Point Protocol MIB (RFC 1473)

Message Support

The SNMP agent supports the Set, Get, GetNext, and Trap messages as defined in RFC 1157. These messages are used as follows:

•Set, which means set the value of a specific object from one of the supported MIBs

•Get, which means retrieve the value of a specific object form one of the supported MIBs

•GetNext, which means retrieve the value of the next object in the

MIB

•Trap, which means send traps to the manager when a particular type of significant event occurs

Supported Traps

The agent can send traps when any of the following occur:

•Cold starts (device server initializes)

•Authentication failures

•Login attempts

Configuration Procedure: Web Interface

1.Click SNMP under System from the menu.

2.Fill in the configuration fields and click Apply to save settings.

3.Click Reboot for changes to take effect.

66 Chapter 10 Special Features: SNMP