DKS Enterprises 6050, 6100 2.7 Loop Detector Wiring, Shadow, Exit

2.7 Loop Detector Wiring

Loops and loop detectors MUST be installed with this gate operator to help prevent the gate from accidentally closing on vehicular traffic.

•Loop detector wiring is shown for DoorKing plug-in loop detectors only. If other loop detectors are used,

refer to the installation instructions supplied with those detectors for wiring instructions.

•If other detectors are used, use a separate power supply to power these detectors.

•Loop layout shown is for a typical swing gate application with two-way traffic, or one-way exit only traffic.

•Refer to the Loop Information Manual (available from www.dkaccess.com) for more information on loops and loop detectors.

Shadow

Automat		Reverse
	ic	Exit

1		9410
2
3
4
5
6
	4502
7
Relay must
8
be set to N.O.

Automatic exit loop lead in wires are twisted approx. 6 twists per foot.

Reverse loop lead in wires are twisted approx. 6 twists per foot and are wired in

9

10

11 12NO

13 14

15

16

17 NC

18 NO

19 20

SW2, switch

		1 and 2 must
		be OFF.
2 1	ON	switch		5,
4 3		must	be		OFF.
8 7 6 5
SW 1
2 1	ON
8 7 6 5 4 3
SW 2

	1		ON
2
				9409
4 3
8 7 6 5
POWER
		SW	2

series.

Shadow loop lead in wires are twisted approx. 6 twists per foot.

N.O.
Com	Shadow Loop Output

20 6050-065-L-11-08