6050 / 6100 SPECIFICATIONS
UL325 Class of Operation | Model 6050 Class I Only ; Model 6100 Class I, II, III, IV |
|
| |
Type of Gate | Vehicular Swing Gates Only |
|
| |
Horsepower | 1/2 HP |
|
|
|
Voltage / Phase | 115 VAC |
|
| |
Current | Model 6050 1/2 HP – 4.3 Amps @ 120V ; Model 6100 1/2 HP – 5.4 Amps @ 120V | |||
Max Gate Weight | Model 6050 - 400 Lbs. ; Model 6100 - 500 Lbs. |
|
| |
Max Gate Length | Model 6050 - 10 Ft. ; Model 6100 - 14 Ft. |
|
| |
Cycles Per Hour | Model 6050 - 10 Per Hour ; Model 6100 - 60 Per Hour |
|
| |
Speed | 90° in approximately 12 seconds |
|
| |
Entrapment Protection | Primary - Inherent adjustable clutch (Type C) |
|
| |
| Secondary - Inherent entrapment sensing system (Type A) and provision |
| ||
|
| for connection of a |
|
|
Pad Mount Kit |
|
|
| |
P/N |
|
|
|
|
27.75” with Convenience Open | 13.5” |
| ||
23” Standard |
|
| ||
|
|
|
| 11” |
|
| Arm Assembly |
|
|
|
| 3” |
|
|
| 6” | 6.25” | 7.25” | 10.5” |
|
| |||
|
| 9.5” | 6.75” |
|
|
| 6.75” |
| |
18” |
| Note: 6100’s with Convenience Open: |
|
|
Post Mount Kit |
|
| ||
Output shaft is offset 1” from center. |
|
| ||
|
|
| ||
P/N |
|
|
|
|
Dimensions are the same for the operator housings.
Arm Assembly
3”
11”
Use this manual with the following models only:
*Optional Convenience Open System
Distance can vary.
2.25”
6” minimum.
This manual is for operators manufactured after June 30, 2008.
DoorKing, Inc. reserves the right to make changes in the products described in this manual without notice and without obligation of DoorKing, Inc. to notify any persons of any such revisions or changes. Additionally, DoorKing, Inc. makes no representations or warranties with respect to this manual. This manual is copyrighted, all rights reserved. No portion of this manual may be copied, reproduced, translated, or reduced to any electronic medium without prior written consent from DoorKing, Inc.
1 |