DKS Enterprises 6050, 6100 5.2 DC System Description, 5.3 DIP-SwitchSettings

5.2 DC System Description

Do Not Adjust

Batteries

	– +		Red/White
	12 V	Amp/Hr
		3
Red
	– +
	12 V	Amp/Hr
		3

Timer needs to			Do Not Adjust	Charging LED
be adjusted.					2340
	Timer
		DIP-Switches

Gate will automatically or manually OPEN and stay open during an AC power failure. DIP-Switch 3 setting will determine how operator will return to normal operation once AC power has been restored.

	DC Motor	Secondary Operator
Red

2340 Board Terminal

Black 2340 Board Terminal

COMMON INPUT OPEN POWER RADIO

See previous

DC ON/OFFpage.

Power Switch

Black/WhiteRed/White

OUTPUT NEGATIVE MOTOR DC OUTPUT POSITIVE MOTOR DC INPUT NEGATIVE BATTERY INPUT POSITIVE BATTERY COMMON VAC 24 INPUT VAC 24 OUTPUT ACTIVATION

Green Purple White

8	COM	8
7	Limit	7
6	Spare
5	Limit	4
4	24VAC
3	Neutral

To Primary or Single Operator

White to Main Terminal #20

Purple to Main Terminal #7

Green to Main Terminal #11

5.3 DIP-Switch Settings

2	Motor
1	Motor

Secondary Operator

Terminal

Switch	Function	Setting	Description
1	Power Failure	OFF	Manual input from 2340 board needed to open gate when a power outage occurs.
	Operating Modes	ON	Gate will automatically open when a power outage occurs.
	Changes	OFF	Opening direction of arm using OFF setting.
			Gate opens counter-clockwise.
	Arm’s
2
	Opening		Opening direction of arm using ON setting.
	Direction	ON
			Gate opens clockwise.
	Restored	OFF	When AC power is restored, a manual input (push button, loop, radio receiver, etc.)
	AC Power		is required to return the gate to normal operation from 2340 or 4502 board.
3
	Operator	ON	When AC power is restored, a 1-second pulse is sent to the gate operator input to
	Response		automatically restore normal operation.
4	Operator Type	OFF	Must be in the OFF position for the 6050 and 6100.
5-8	Not Used	OFF	Must be in the OFF position.

6050-065-L-11-08 31