Dolmar MS-250.4 Correct Handling Of Machine, Points In Operation And How To Stop, Starting

CORRECT HANDLING OF MACHINE

Attachment of shoulder strap

–Adjust the strap length so that the cutter blade will be kept parallel with the ground.

Detachment

For MS-251.4

–In an emergency, push the notches (1) at both sides, and you can detach the machine from you.

Be extremely careful to maintain control of the machine at this time. Do not allow the machine to be deflected toward you or anyone in the work vicinity.

WARNING: Failure to maintain complete control of the machine at all could result in serious bodily injury or DEATH.

Hanger

For MS-250.4

–In case of emergency, remove the emergency detachment lever (2) by pulling strongly with a finger. The machine sill detach from body.

Be extremely careful to maintain control of the machine at this time. Do not

allow the machine to be deflected toward you or	anyone in the work
vicinity.	(2)

WARNING: Failure to maintain complete control of the machine at all could result in serious bodily injury or DEATH.

Hanger

POINTS IN OPERATION AND HOW TO STOP

Observe the applicable accident prevention regulations!

STARTING

Move at least 3m away from the place of refuelling. Place the brush cutter on a clean piece of ground taking care that the cutting tool does not come into contact with the ground or any other objects.

A:Cold start Throttle control dial

1) Set this machine on a flat space.

I-O switch (1)

Throttle lever (6)

OPERATION

Low speed Lock-off lever

High speed

13