_IA_CA1000.book Seite 32 Freitag, 30. Januar 2009 11:12 11

Installation

Dometic CA1000

7.3.3Menu level 2: Switching from AC to AC/DC operation

You can upgrade the roof air conditioner with the CA-DC kit so that it can not only be used with the vehicle stationary, but also while driving. To do this, you must reconfigure the system software. No alterations need to be made in this menu when you operate the system without a CA-DC up- grade kit.

Start configuration mode (see chapter “Start and end configuration mode” on page 31).

The first digit of the display (fig. e 5, page 6) shows the menu level and the second and third show the parameter which can be set.

Press the + button (fig. e 6, page 6) once to switch to menu level 2.

Press the Mode button (fig. e 4, page 6) to change the parameter.

The digits in the display flash until the parameter you enter is con- firmed.

Press the + and buttons (fig. e 6 und 7, page 6) to select AC mode (01) or AC/DC mode (02).

Press the Mode button (fig. e 4, page 6) to confirm your entry.

The set value is saved and is then used when the system is restarted.

You are now in menu level 2 and can use the + and buttons to switch between menu levels.

7.3.4Menu level 3: Operating mode

The system always starts with a defined operating mode for room temper- ature. This parameter can be configured:

Start configuration mode (see chapter “Start and end configuration mode” on page 31).

The first digit of the display (fig. e 5, page 6) shows the menu level and the second and third show the parameter which can be set.

Press the + button (fig. e 6, page 6) twice to switch to menu level 3.

Press the Mode button (fig. e 4, page 6) to change the parameter.

The digits in the display flash until the parameter you enter is con- firmed.

Use the + and buttons (fig. e 6 and 7, page 6) to select the mode the system starts in (e.g. 00 for automatic mode or 01 for mode 1 etc.).

Press the Mode button (fig. e 4, page 6) to confirm your entry.

The set value is saved and is then used when the system is restarted.

You are now in menu level 3 and can use the + and buttons to switch between menu levels.

32

Page 32
Image 32
Dometic CA1000 installation manual Menu level 2 Switching from AC to AC/DC operation, Menu level 3 Operating mode