Dynaudio pmn manual Setups, Stereo Setup with mono Subs, Stereo Setup with stereo Subs

Air_US_rev_111.qxd 16-12-2004 14:15 Page 10

To set a Master

monitor as System Controller

the TC Link button on the rear

panel MUST be in out-position.

To set a Master monitor as System Controller the TC Link button on the rear panel MUST be in out-position.

To set a Master monitor as System Controller the TC Link button on the rear panel MUST be in out-position.

SETUPS

Stereo Setup

This illustration shows how to connect a standard stereo setup.

•Left monitor is set as System Controller by leaving out the TC Link button on the rear panel.

•Left monitor receives both Left and Right Input signal.

•Right monitor receives audio via the TC-LINK RJ-45 connection.

•The Remote and/or AIR Soft, can be connected to any available TC LINK Out connection.

Stereo Setup with mono Sub(s)

This illustration shows how to connect a stereo setup with 1 Sub.

•Left monitor is set as System Controller by leaving out the TC Link button on the rear panel.

•Left monitor receives both Left and Right Input signal.

•Right monitor and Sub receives audio via the TC LINK RJ-45 connections on the Left monitor.

•With no Bass-management, no signal is sent to the Sub.

•With Bass-management activated, Low Frequency information from Left and Right channels below the set Cross-over frequency is extracted and fed to the Sub.

•The Remote and/or AIR Soft, can be connected to any

available TC LINK Out connection.

Stereo Setup with stereo Subs

This illustration shows how to connect a stereo setup with SUBs.

•Left monitor is set as System Controller by leaving out the TC Link button on the rear panel.

•Left monitor receives both Left and Right Input signal.

•Right Monitor and Subs receive audio via the TC LINK RJ-45 connection as illustrated.

•With no Bass-management, no signal is sent to the Sub.

•With Bass-management activated, Low Frequency

information from Left and Right channels, below the set Cross-over frequency, is extracted. Low frequency information from the Left channel is distributed to L Sub and Low Frequency information from the Right channel is distributed to the Right Sub.

•The Remote and/or AIR Soft, can be connected to any available TC LINK Out connection.

10