Dynaudio pmn manual Rear Panel Description - Master, Master Unit - Analog I/O, Slave/Sub

Air_US_rev_111.qxd 16-12-2004 14:15 Page 7

REAR PANEL DESCRIPTION - MASTER

Master Unit - Analog I/O

• System Controller/Slave switch Out-position :The monitor operates as a System Controller

There can be only one System

Controller in a setup.

In -position:

The monitor operates as either a regular

Master or a Slave unit.

• RJ45 Link connections for downstream Slave units

• Option slot with analog I/O card installed. (optional)

• AES/EBU digital Input

• Word Clock BNC sync

• Power Input 100-240V

• Power On/Off - switch

Slave/Sub

• RJ45 Link connections for downstream Slave units

• Power Input 100-240V

• Power On/Off - switch

Optional Digital I/O card

Optional Digital I/O card

With this card installed in the Master Monitor option slot a 5.1 Digital/6 Master setup becomes an option.

Three AES/EBU connections (6 channels) can then be fed to one Master monitor and distributed downstream.

For further information see “Setups”.

7