Air_US_rev_111.qxd
PARAMETER DESCRIPTION
Setup Menu
• Press ENTER to access
Set Monitor Task
For the System Controller - Master monitor to identify and operate all monitors in the setup, each monitor must be given one of the following tasks indicating function and position.
•Press ENTER to access task options
•Use ARROW keys to select task
•Press ENTER to confirm selected task
Following tasks can be given:
Setup
•Press ENTER to enter select mode. Select mode is indicated by “ * ”
•Press ENTER to confirm choice
Empty:
No selection
Custom:
For future configuration
Stereo analog:
Two monitor stereo setup with analog* Inputs selected.
No Task | C Sur |
L Front | L SUB |
R Front | R SUB |
Center | LS Chain |
(C) SUB | RS Chain |
L Sur | L Inner |
R Sur | R Inner |
| Custom |
Reserved for future use
Stereo Digital:
Two monitor stereo setup with digital Inputs selected.
5.1 Analog:
5.1 setup with analog* Inputs selected.
5.1 Digital
5.1 setup with digital Inputs selected.
6.1 Analog
5.1Setup + Center surround on a separate channel gives the 6.1 setup.
6.1 Digital
5.1Setup + Center surround on a separate channel gives the 6.1 setup.
5.3 Analog
Analog setup with 5 monitors and 3 subs
5.3 Digital
Digital setup with 5 monitors and 3 subs
*Analog Inputs are only available with an optional analog card installed.
5.1 Digital/6 Master
5.1Setup using one Master with optional Digital I/o card installed, 4 slave monitors (or masters set as slave) and 1 sub.
External Clock
• Press ENTER to access
BNC Sync On:
The monitor attempts to lock on the Word Clock BNC.
BNC Sync Off:
The monitor will attempt to lock on the AES Input.
Calibrate Monitor
•Press ENTER
•Select monitor to calibrate using the ARROW keys
•Press ENTER
19
