Dynaudio pmn manual Main, Tools, Air Soft, The network icon upper left corner, VOLUME dialer

Air_US_rev_111.qxd 16-12-2004 14:18 Page 47

AIR SOFT

Main

This is the Main screen from where all other AIR SOFT screens are accessed.

The (((•))) network icon (upper left corner)

If steady:

The computer running the AIR SOFT is not correctly connected to AIR monitors. Check connections, cables and refer to the setup-illustrations on pages 9-13 in this manual. If blinking:

The computer is correctly connected to your AIR monitor system.

The (((•))) icon is also used to access the Network screen. Press (((•))) to access.

VOLUME dialer

Use the mouse on the VOLUME dialer on the middle of the display to adjust Volume

REF LEV. keys

The three keys below the dialer instantly switches between the 3 user-defined Reference level settings.

To change these Ref. Levels:

•Set dialer as desired

•Hold cursor above Ref. Level key and select “Store” from the pop-up icons appearing.

Monitor and Sub icons

Depending on the currently selected setup (if any) satellite monitors and subs will be indicated by appropriate icons as illustrated above. Press to access specific parameters for the monitors.

This symbol in the Main screen indicates that the selected setup expects a monitor at a certain position but no monitor is found. Check your connections and retry.

Bass Mgt - Bass Management

Indicates the selected Cross-over frequency for Bass Management.

Tools

When placing the cursor on top of a monitor, a few tools will appear:

• Press this symbol to enter calibration pages

• Press to solo the monitor

• Press to mute the monitor

47