Using the Monitor Panel
You can use the LCD screen and the buttons beneath it to:
Monitor UPS operation
Look at a log of UPS events (alarms, notices, and commands)
5.2Using the Buttons
The buttons below the LCD screen are labeled with arrows indicating their functions:
Press the 
and 
buttons to move through the options in a menu, or to scroll through the list of alarms and notices in the event log.
Press the 
and 
buttons to move through the menu titles on the menu bar. Press them simultaneously to silence the horn, or to test the lamps behind the status indicators.
Press the 
button to toggle the use of the 
and 
buttons between the menu box and the information area.
5.3Adjusting the Contrast
Use the buttons to adjust the contrast on the LCD screen. Hold down the 
button, then press the 
button to increase the contrast or the 
button to decrease the contrast.
5.4 Using the Load Off Button
The LOAD OFF button is red and covered by a clear plastic shield. In an emergency, you can press this button to cut off utility power to the power processing unit of the UPS and to the critical load. For more information, see Chapter 11, “Using the LOAD OFF Button.”
C A U T I O N
All power to the critical load is lost when you press the LOAD OFF button. You should use the LOAD OFF button only when you want to
EATON Powerware® 9315 UPS |
