Eaton Electrical Powerware 9315 operation manual 4 shows the Load Amps Meters screen

Using the Monitor Panel

￿Graphics - Displays a real-time graphic representation of the flow of current through the internal UPS components.

￿Setup - Allows you to configure the UPS communication port and set the date and time for the timestamp.

Figure 5-3 shows the LCD screen as it appears when you first start the UPS. The Meters menu is displayed in the menu box, with the System option highlighted. In the information area, the system meters show their current readings.

		Uninterruptible Power System
System Normal								04 MAY 1997			14:23:45
Alarm:	None
Notice: None
Battery			Input					Output
Percent
100%		VAB	VBC	VCA		FREQ	VAB	VBC	VCA		FREQ
		480	480	480		60.0	480	480	480		60.0
		IA	IB			IC	IA	IB	IC		IN
		480	480			480	361	361	361		000
		KVA	KW			PF		KVA	KW	PF
		399	379		0.95			300	240	0.80
Meters
System			Bypass					Battery
Load Amps
		VAB	VBC			VCA		V		I
		480	480			480		540		000
Meters	Events	Statistics Graphics			Setup

Figure 5-3. System Meters Screen (Typical for Powerware 9315 300 480/480V UPS)

The Input area shows the phase-to-phase voltage, frequency, and phase current of the incoming utility, followed by the kVA, KW, and power factor measurements. The output area shows the same information for the power being output by the UPS.

The Bypass area shows the phase-to-phase voltage of the bypass source. The Battery area displays the DC voltage (V) and the DC current (I).

Select Load Amps from the Meters menu to see a real-time bar graph of the output current of the UPS. The graph shows the current for each phase.

Figure 5-4 shows the Load Amps Meters screen.

EATON Powerware® 9315 UPS (200–300 kVA) Operation Manual S 164201036 Rev F powerware.com 5-5