Eaton Electrical Powerware 9315 Starting and Stopping the UPS, Using the Monitor Panel, Save

Table of Contents

4 Starting and Stopping the UPS	4-1
4.1 Using the Control Panel	4-1
4.1.1 To Place the UPS in Normal Mode	4-2
4.1.2 To Shut Down the UPS from Normal Mode	4-3
4.1.3 To Start the UPS in Bypass Mode	4-3
4.1.4 To Shut Down Power to the Critical Load While in Bypass Mode	4-3

5 Using the Monitor Panel		5-1
5.1	Using the LCD Screen	5-2
5.2	Using the Buttons	5-3
5.3	Adjusting the Contrast	5-3
5.4	Using the Load Off Button	5-3
5.5	Reading the Status Indicators	5-4
5.6	Using the Menu Options	5-4

6 Using Features and Options		6-1
6.1	Building Alarm Monitoring	6-1
6.2	Summary Alarm Contacts	6-2
6.3	Remote Monitor Panel	6-3
6.4	Battery Cabinets	6-5
6.5	External Battery Disconnect	6-5
6.6	Relay Interface Module	6-6
6.7	Supervisory Contact Module	6-7

7 Communication				7-1
7.1	Locating the Communication Bays			7-1
7.2	X-Slot Cards			7-2
7.3	LanSafe Power Management Software			7-3
7.4	Connecting Equipment to a Serial Port			7-3
7.5	Configuring the Serial Ports			7-6
7.5.1		Mode		7-7
7.5.2		Rate	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	7-7
7.5.3		Data/Stop		7-8
7.5.4		Handshaking		7-8
	7.5.4.1		Disabled (No Handshaking)	7-8
	7.5.4.2		XON/XOFF	7-8
7.5.5		Save	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	7-8
7.5.6		Default Settings		7-8

ii EATON Powerware® 9315 UPS (200–300 kVA) Operation Manual S 164201036 Rev F powerware.com